#############################################################################
#
# Logging settings
#

set logGroup           "ConfigurationManager"
set logLevelWarning    warning
set logLevelInfo       info
set logLevelDebug      debug

log $logGroup $logLevelInfo "Parsing configuration script"


#############################################################################
#
# Constants
#

seti Off 0
seti On  1

seti Low    1
seti Medium 2
seti High   3

seti memoryLevelHigh    512
seti memoryLevelMedium  384
seti memoryLevelLow     256
seti memoryLevelUnknown 0

seti cpuLevelHigh        2800
seti cpuLevelMedium      2200
seti cpuLevelLow         1000
seti cpuLevelUnsupported 0


#############################################################################
#
# Identify gfx device
#

# set some config variables based on a card table and vendor specific rules
# sets isCardFound, cardVendor, and cardName
include "Video Cards.sgr"

# Fallback on the card name text supplied by the card itself.
# Assumes that at least the cardVendor has been matched, since
# vendor name is not contained in some vendor card names.
# Note that specific vendors are overridden to a default card.
#  For ATI    -> Radeon 9800 Pro
#  For NVIDIA -> NVIDIA 4800 TI SE
if (not $isCardFound)
   set cardName $cardNameText
endif



#############################################################################
#
# Configuration override controlled by command line option -cardConfig.
#
if (varExists(cardConfig))
   # test unsupported cards using sw rendering
   if ($cardConfig = 1)
      log $logGroup $logLevelInfo "Testing with all devices unsupported."
      set  cardVendor    TestingAllUnsupported
      set  cardName      TestingAllUnsupported

   elseif (($cardConfig = 2) and ($deviceNumber = 0))
      log $logGroup $logLevelInfo "Testing with the first device unsupported."
      set  cardVendor    TestingFirstUnsupported
      set  cardName      TestingFirstUnsupported

   elseif (($cardConfig = 3) and ($deviceNumber != 0))
      log $logGroup $logLevelInfo "Testing with the all devices except first unsupported."
      set  cardVendor    TestingAllButFirstUnsupported
      set  cardName      TestingAllButFirstUnsupported

   elseif (($cardConfig = 100) and ($deviceNumber = 0))
      log $logGroup $logLevelInfo "Testing first device as swvp only part."
      boolProp forceSoftwareVP true
   endif
endif



#############################################################################
#
# Determine if gfx device is supported, force software rendering if not
#

setb useSoftwareRasterizer false

if (match("${cardVendor}", "ATI"))
   if (match("${cardName}", "*Mach*") or match("${cardName}", "*Rage*"))
      setb useSoftwareRasterizer true
   endif

elseif (match("${cardVendor}", "NVidia"))
   if (match("${cardName}", "NV 1") or match("${cardName}", "NV 2") or match("${cardName}", "*Riva*") or match("${cardName}", "*TNT*"))
      setb useSoftwareRasterizer true
   endif

elseif (match("${cardVendor}", "Intel"))
   if (match("${cardName}", "*810*") or match("${cardName}", "*815*") or match("${cardName}", "*740*") or match("${cardName}", "*752*"))
      setb useSoftwareRasterizer true
   endif

else
   # unsupported/unknown vendor
   setb useSoftwareRasterizer true

endif

if ($useSoftwareRasterizer)
   log $logGroup $logLevelWarning "Unsupported video card.  Forcing software rendering on this device"
else
   log $logGroup $logLevelInfo "Supported video card."
endif

if (not $useSoftwareRasterizer)
   # failed to obtain device texture memory size, force to 32MB
   if ($textureMemory = 0)
      seti textureMemory       32
      setb textureMemorySizeOK false
   endif

   if ($textureMemory < 28)
      log $logGroup $logLevelWarning "Insufficient video memory.  Forcing software rendering on this device"

      # require a card with at least 32MB
      setb useSoftwareRasterizer true
   endif
endif

if ($useSoftwareRasterizer)
   # ignore texture memory reported by gfx device, this is not hardware texture memory
   seti textureMemory 32
endif

if (not $useSoftwareRasterizer)
   log $logGroup $logLevelInfo "Hardware rendering is enabled"
endif



#############################################################################
#
# Apply gfx device specific workarounds
#
# Available device props:
#  forceSoftwareVP
#  forceSoftwareDevice
#  queriesOK
#  windowedModeFormatConversionOK
#  enumerateMultisampleLevels
#  skipValidateDevice
#  enableDriverMemoryManager
#  softwareDeviceLocalVideoMemorySize
#  deviceLocalVideoMemorySizeDefault
#  disableVSyncSupport
#  substituteFlipForDiscardSwapEffect
#  minTextureDimensionForBalance
#
# Additional props:
#  vs2LoopsFunctional

setb textureMemorySizeOK        true
setb supportsDirtyRect          true
setb supportsTurboRect          true
setb supportsSpecialEventCamera true
setb forceLowSettings           false
setb forceLowResolution         false
setb forceMediumMaterialDetail  false
setb isIntegratedChipset	false

boolProp useRenderTextures               false
uintProp antialiasingSupport             1


if (not $useSoftwareRasterizer)

   # never trust the driver to manage its own memory
   boolProp enableDriverMemoryManager  false

   boolProp vs2LoopsFunctional         false
   boolProp presentWorkaround          false
   boolProp enumerateMultisampleLevels true

   # not enough texture memory for antialiasing
   if ($textureMemory < 127)
      boolProp enumerateMultisampleLevels false
   endif

   if (match("${cardVendor}", "NVIDIA"))      
      boolProp vs2LoopsFunctional true

      # on NVidia cards, create a dummy texture on device creation to prevent BSODs      
      boolProp createNVidiaWorkaroundTexture true      

      if ($appControlledAA)
         # nvidia drivers handle offscreen aa
         uintProp antialiasingSupport    3
      else
         # remove this when the texture manager balancing is fixed.
         boolProp disableTexMemEstimateAdjustment true

         # turn off dirty rects
         uintProp antialiasingSupport    1
         setb supportsDirtyRect          false
      endif
      
      if (match("${cardName}", "*GeForce2*Integrated*") or match("${cardName}", "*GeForce?2*Integrated*") or match("${cardName}", "*GeForce4*Integrated*") or match("${cardName}", "*GeForce?4*Integrated*"))
         boolProp causticsEnabled            false
         boolProp enumerateMultisampleLevels false

         setb forceLowSettings   true
         setb forceLowResolution true
      endif

      # the 6200 Turbo Cache peformed very poorly in CATLAB runs for EP2
      if (match("${cardName}", "GeForce 6200 TC"))
         setb forceLowSettings   true
      endif
      
      # disable shaders by default for NV3x generation, only enable for high end cards
      if ($maxVertexProgramVersionHWMajor = 2)
         boolProp useShaders false

         if (match("${cardName}", "GeForceFX*") or match("${cardName}", "*GeForce?FX*"))
            if (match("${cardName}", "*57?0*") or match("${cardName}", "*58?0*") or match("${cardName}", "*59?0*"))
               boolProp useShaders true

               log $logGroup $logLevelInfo "Enabling shaders for high-end NV3x"
            endif
            if (match("${cardName}", "*NV35*") or match("${cardName}", "*NV36*") or match("${cardName}", "*NV38*") or match("${cardName}", "*NV39*"))
               boolProp useShaders true

               log $logGroup $logLevelInfo "Enabling shaders for high-end NV3x"
            endif
            
            # 5700 cards sometimes have problems with bump mapping so setting default to medium
            if (match("${cardName}", "*5700*"))
               log $logGroup $logLevelInfo "Forcing Medium Material detail on 5700"
               setb forceMediumMaterialDetail true
            endif
         endif

         if (match("${cardName}", "QuadroFX*") or match("${cardName}", "*Quadro?FX*"))
            if (match("${cardName}", "*3000*") or match("${cardName}", "*1?00*"))
               boolProp useShaders true

               log $logGroup $logLevelInfo "Enabling shaders for high-end NV3x Quadro"
            endif
         endif

         # caps read vs 3.0, but dx9b is returning vs 2.0, once 9c is used this fix can be removed
         if (match("${cardName}", "*GeForce*"))
            if (match("${cardName}", "*68?0*"))
               boolProp useShaders true

               log $logGroup $logLevelInfo "Enabling shaders for high-end NV40 Parts on Dx9b"
            endif
         endif
      endif

      if ($driverBuild <= 5216)
         # turn off antialiasing to avoid BSODs on older drivers
         boolProp enumerateMultisampleLevels false

         log $logGroup $logLevelInfo "Driver is too old. Disabling AA on this device."
      endif

      if (($driverBuild < 5212) and ($maxPixelProgramVersionMajor < 2))
         # turn off cinematics on older drivers with DX8 cards to avoid failed copies
         setb supportsSpecialEventCamera false

         log $logGroup $logLevelInfo "Driver is too old. Disabling SpecialEventCameras on this device."
      endif

      if ($maxVertexProgramVersionHWMajor = 0)
         boolProp skipValidateDevice true

         log $logGroup $logLevelInfo "Enabling D3DERR_CONFLICTINGRENDERSTATE validation workaround"
      endif

      if ($driverBuild > 5216 and $driverBuild < 6176)
         # force SWVP on 2D vertex shader to work around UI and shadow rendering
         # bugs; known to occur on GeForce4, Quadro4, and FX5200 on driver versions
         # 56.56 and 56.72; known not to occur with FX5800+ or with 52.16 or
         # 61.76 drivers.
         boolProp draw2DForceSWVP true
      endif

   elseif (match("${cardVendor}", "ATI"))      
      # loops support broken in 6458. Fixed in catalyst 4.9 (6476) but we require 4.10 to be safe.
      if ($driverBuild >= 6476)
         boolProp vs2LoopsFunctional true
      endif
      
      # workaround for forced aa crash as of 6458.  Fixed in catalyst 4.9 (6476) but we require 4.10 to be safe.
      # TODO: this is not yet enabled, pending testing
      #if ($driverBuild < 6476)
         boolProp useRenderTextures true
      #endif


      # avoid a race condition with color copies and ui
      boolProp presentWorkaround  true

      if (match("${cardName}", "*Radeon?VE*") or match("${cardName}", "*7?00*") or match("${cardName}", "*R100*") or match("${cardName}", "*IGP 3?0*"))
         log $logGroup $logLevelInfo "Forcing turbo rects off"
         setb supportsTurboRect   false

         boolProp simpleTerrain              true
         boolProp causticsEnabled            false
         boolProp enumerateMultisampleLevels false

         setb forceLowSettings    true

         if (match("${cardName}", "*Radeon?VE*") or $driverBuild < 6414)
            log $logGroup $logLevelInfo "Forcing swvp"
            boolProp forceSoftwareVP true
         endif
      endif

      if ($maxVertexProgramVersionHWMajor < 2)
         # Radeon 8500 and greater have problems switching between FF and VS?
         log $logGroup $logLevelInfo "Forcing shaders of for ATI DX8"

         boolProp useShaders false
      endif

      if (match("${cardName}", "*Mobility*"))
         setb isIntegratedChipset true	
      endif

      # X800 based cards exhibit rendering corruption if turbo rect is enabled
      if (match("${cardName}", "*X800*") or match("${cardName}", "*R420*"))
         setb supportsTurboRect false

         log $logGroup $logLevelInfo "Forcing turbo rects off"
      endif

   elseif (match("${cardVendor}", "Intel"))
      setb isIntegratedChipset true	
      boolProp simpleTerrain              true
      boolProp enumerateMultisampleLevels false
      boolProp disableVSyncSupport        true    # work around flickering UI
      boolProp useShaders                 false   # (EP2 change) mostly for performance, but driver issues showed up in v14.14

      # the Intel minspec driver doesn't misreport available texture memory, so it's not
      # necessary to adjust the texture memory estimate it returns. This may also fix
      # a Windows "device failure" message that occurs sometimes on this device.
      boolProp disableTexMemEstimateAdjustment true
      
      # assuming Intel parts are UMA, drop the texture memory to 32 if not much system memory
      if ($memory <= $memoryLevelLow)
         if ($textureMemory > 32)
            seti textureMemory 32
         endif
      endif

      if (match("${cardName}", "*845*") or match("${cardName}", "*865*") or match("${cardName}", "*830*") or match("${cardName}", "*855*"))
         boolProp causticsEnabled false

         setb forceLowSettings   true
         setb forceLowResolution true
      endif
      
      # the 915 sets the caps bit that indicates it can do texture projection,
      # but does it incorrectly in the pixel stage. Here we override the texture
      # projection cap we get from the device.
      if (match("${cardName}", "*915*"))
      	boolProp disableTextureProjection true
      endif
   endif

   intProp deviceLocalVideoMemorySizeDefault ($textureMemory * 1024 * 1024)

else
   setb forceLowSettings   true
   setb forceLowResolution true
 
   # force sw, swvp, and no aa
   boolProp forceSoftwareDevice        true
   boolProp forceSoftwareVP            true
   boolProp enumerateMultisampleLevels false
   boolProp simpleTerrain              true
   boolProp causticsEnabled            false

   intProp softwareDeviceLocalVideoMemorySize ($textureMemory * 1024 * 1024)

endif

# since we don't do bumpmapping on less ps2.0-capable hardware, eliminate tangents
# from the vertex data
# also, the presence of per-vertex tangents in the vertex data stream causes
# "exploded" polygons on the Radeon 9000, even if the data is ignored by the shader
if ($maxPixelProgramVersionMajor < 2)
   boolProp skipTangentsInVertexData true
endif


#############################################################################
#
# Print system info
#

if ($deviceNumber = 0)
logSystemInfo "=== Application info ==="
logSystemInfo "Name:            ${appName}"
logSystemInfo "Version:         ${version}"
logSystemInfo "Build:           ${buildType}"

logSystemInfo "=== Machine info ==="
logSystemInfo "OS version:      ${osVersion}"
logSystemInfo "CPU:             ${cpuSpeed}Mhz, Name:${CPU}, FPU:${FPU}, MMX:${MMX}"
logSystemInfo "Memory:          ${memory}MB"
logSystemInfo "Free memory:     ${freeMemory}MB"
logSystemInfo "User:            ${userName}"
logSystemInfo "Computer:        ${computerName}"

logSystemInfo "=== Sound device info ==="
logSystemInfo "Name:            ${soundCardName}"
logSystemInfo "Driver:          ${soundDriverName}"
endif

logSystemInfo "=== Graphics device info ==="
logSystemInfo "Number:          ${deviceNumber}"
logSystemInfo "Name (driver):   ${cardNameText}"
if ($isCardFound)
logSystemInfo "Name (database): ${cardName}"
else
logSystemInfo "Name (database): ${cardName} <<NOT FOUND IN DATABASE!>>"
endif
if ($isIntegratedChipset)
logSystemInfo "                 (Integrated Chipset)"
endif
logSystemInfo "Vendor:          ${cardVendor}"
logSystemInfo "Chipset:         ${cardChipset}"
logSystemInfo "Driver:          ${driverName}, Version: ${driverVersion}"
logSystemInfo "Driver version:  ${driverBuild}"
logSystemInfo "Monitor:         ${monitorName}"
logSystemInfo "Monitor aspect:  ${monitorAspect}, ${monitorAspectString}"
logSystemInfo "Screen mode:     ${screenWidth}x${screenHeight}x${screenBPP}BPP,${screenRefresh}Hz"
if ($textureMemorySizeOK)
logSystemInfo "Texture memory:  ${textureMemory}MB"
else
logSystemInfo "Texture memory:  ${textureMemory}MB <<OVERRIDE>>"
endif
logSystemInfo "HW T&L:          Fixed function:${fixedFunctionHWTnL} Programmable:${maxVertexProgramVersionHWMajor}.${maxVertexProgramVersionHWMinor}"
logSystemInfo "Pixel program:   ${maxPixelProgramVersionMajor}.${maxPixelProgramVersionMinor}"
logSystemInfo "Texture stages:  ${textureStages}"
logSystemInfo "AppControlledAA: ${appControlledAA}"


#############################################################################
#
# UI Options

log $logGroup $logLevelDebug "Begin parsing option definitions"

option MaterialDetail
   setting $Low
      boolProp bumpMapping false
      intProp  imageDataSizeReductionOnLoad 2

   setting $Medium
      boolProp bumpMapping false
      intProp  imageDataSizeReductionOnLoad 1

   setting $High
      boolProp bumpMapping true
      intProp  imageDataSizeReductionOnLoad 0
end


option ObjectDetail
   setting $Medium
      boolProp reduceBoneWeights true
      boolProp useLODs           true
      intProp  lodOverride       35

   setting $High
      boolProp reduceBoneWeights false
      boolProp useLODs           false
      intProp  lodOverride       0
end

option ObjectHiding
   setting $Off
      intProp renderInsideVisibleObjects 0

   setting $On
      intProp renderInsideVisibleObjects 1
end

option Shadows
   setting $Low
      boolProp simShadows       false
      boolProp objectShadows    false
      boolProp guob             false
      boolProp heightMapShadows false

   setting $Medium
      boolProp simShadows       false
      boolProp objectShadows    false
      boolProp guob             true
      boolProp heightMapShadows true

   setting $High
      boolProp simShadows       true
      boolProp objectShadows    true
      boolProp guob             true
      boolProp heightMapShadows true
end


option OpaqueUI
    setting $Off
       boolProp renderOpaqueUI false

    setting $On
       boolProp renderOpaqueUI true
end


option Reflection
   setting $Off
      boolProp    reflectionWithExtraViewer  false
      boolProp    nhoodWaterReflection       false

   setting $On
      boolProp    reflectionWithExtraViewer  true
      boolProp    nhoodWaterReflection       true
end


option EffectsQuality
   setting $Low
      boolProp  useEffects            true
      floatProp particleDensity       1
      floatProp particleScale         1
      intProp   maxParticlesTarget    2000
      intProp   particleLODOffset     0    # subtracted from the zoom.
      intProp   effectPriorityLevel   1

   setting $Medium
      boolProp  useEffects            true
      floatProp particleDensity       1
      floatProp particleScale         1
      intProp   maxParticlesTarget    5000
      intProp   particleLODOffset     0    # subtracted from the zoom.
      intProp   effectPriorityLevel   2

   setting $High
      boolProp  useEffects            true
      floatProp particleDensity       1
      floatProp particleScale         1
      intProp   maxParticlesTarget    10000
      intProp   particleLODOffset     0    # subtracted from the zoom.
      intProp   effectPriorityLevel   3
end


option LightingQuality
   setting $Low
      boolProp lightingEnabled           true
      boolProp portalLighting            false
      boolProp floorAndWallNormalMapping false
      boolProp specHighlights            false

   setting $Medium
      boolProp lightingEnabled           true
      boolProp portalLighting            true
      boolProp floorAndWallNormalMapping false
      boolProp specHighlights            true

   setting $High
      boolProp lightingEnabled           true
      boolProp portalLighting            true
      boolProp floorAndWallNormalMapping true
      boolProp specHighlights            true
end


option SoundQuality
   setting $Low
      intProp AudioPerformance 0

   setting $Medium
      intProp AudioPerformance 1

   setting $High
      intProp AudioPerformance 2
end


#
# Options without ui access.
#
option DirtyRect
   setting $High
      # no dirty rects
      intProp dynamicRenderStrategy 0

   setting $Medium
      # 4 buffer mode
      intProp dynamicRenderStrategy 2

   setting $Low
      # 2 buffer mode
      intProp dynamicRenderStrategy 1
end


option FullscreenFadeEffect
   setting $Off
      boolProp enableSnapshot false

   setting $On
      boolProp enableSnapshot true
end


option Turbo
   setting $High
      boolProp useTurboRect true

   setting $Medium
      boolProp useTurboRect true

   setting $Low
      boolProp useTurboRect false

end


option SimulatorControls
   setting $High
      intProp maxNumOfVisitingSims   8

   setting $Medium
      intProp maxNumOfVisitingSims   4

   setting $Low
      intProp maxNumOfVisitingSims   2
end


option LightingOptimizations
   setting $High
      boolProp optimizedDiffusion        true
      boolProp incrementalLighting       true
      boolProp lerpLights                true
      boolProp useDirtyTiles             true
end


option AnimationSamplingLevel
   setting $Low
      # sample nearest animation frame
      boolProp animationFrameSampling true

   setting $Medium
      # sample nearest two animation frames and slerp
      boolProp animationFrameSampling false
end


option LivePIP
   setting $Off
      boolProp livePIP        false
      boolProp livePIPDefault false

   setting $On
      boolProp livePIPDefault true
	# do not override user's choice if the setting is ON
end


option SpecialEventCamera
   setting $Off
      boolProp chooseCameraSpecialEventEnabled false
      boolProp CameraSpecialEventEnabled       false

   setting $On
      boolProp chooseCameraSpecialEventEnabled true
	# do not override user's choice if the setting is ON

      
end


option ScreenModeResolution
   setting $Low
      uintProp maxResWidth      800
      uintProp maxResHeight     600
      uintProp defaultResWidth  800
      uintProp defaultResHeight 600

   setting $Medium
      uintProp maxResWidth      1280
      uintProp maxResHeight     1024
      uintProp defaultResWidth  1024
      uintProp defaultResHeight 768

   setting $High
      uintProp maxResWidth      1600
      uintProp maxResHeight     1200
      uintProp defaultResWidth  1024
      uintProp defaultResHeight 768
end

option SubjectTracking
   setting $Low
	floatProp centerTrackingDeadZoneMagnitude 70

   setting $Medium
	floatProp centerTrackingDeadZoneMagnitude 30

   setting $High
	floatProp centerTrackingDeadZoneMagnitude 30
end


option LotSkirtSettings
   setting $Low
      boolProp enableLotImpostersInLot false
      boolProp enableNeighborhoodOccupantsInLot false
      uintProp lotSkirtSizeIncrease 5

   setting $Medium
      boolProp enableLotImpostersInLot true
      boolProp enableNeighborhoodOccupantsInLot true
      uintProp lotSkirtSizeIncrease 5

   setting $High
      boolProp enableLotImpostersInLot true
      boolProp enableNeighborhoodOccupantsInLot true
      uintProp lotSkirtSizeIncrease 9
end


log $logGroup $logLevelDebug "Finished parsing option definitions"


#############################################################################
#
# Hardware Rendering
#

# This cannot be defined as a local variable, the if clause is still executed when
#   sw render path is taken and an exception generated that fails the parsing.  Be
#   careful with the use of local variables.

if (not $useSoftwareRasterizer)
   
   # set a base level of options based on the card rating
   if (($memory >= $memoryLevelHigh) and ($cpuSpeed >= $cpuLevelHigh) and ($maxVertexProgramVersionHWMajor >= 1) and not $forceLowSettings)
      log $logGroup $logLevelInfo "Selecting High base level"
      
      setOption OpaqueUI              $Off
      setOption LivePIP               $On
      setOption Reflection            $On
      setOption EffectsQuality        $High
      setOption LightingQuality       $High
      setOption Shadows               $High
      setOption MaterialDetail        $High
      setOption ObjectDetail          $High
      setOption ObjectHiding          $Off
      setOption SubjectTracking       $High
      setOption LotSkirtSettings      $High

   elseif (($memory >= $memoryLevelMedium) and ($cpuSpeed >= $cpuLevelMedium) and ($maxVertexProgramVersionHWMajor >= 1) and not $forceLowSettings)
      log $logGroup $logLevelInfo "Selecting Medium base level"
      
      setOption OpaqueUI              $Off
      setOption LivePIP               $On
      setOption Reflection            $Off
      setOption EffectsQuality        $Medium
      setOption LightingQuality       $Medium
      setOption Shadows               $Medium
      setOption MaterialDetail        $Medium
      setOption ObjectDetail          $High
      setOption ObjectHiding          $On
      setOption SubjectTracking       $Medium
      setOption LotSkirtSettings      $Medium

   else
      log $logGroup $logLevelInfo "Selecting Low base level"
      setb forceLowSettings true

      setOption OpaqueUI              $Off
      setOption LivePIP               $Off
      setOption Reflection            $Off
      setOption EffectsQuality        $Low
      setOption LightingQuality       $Low
      setOption Shadows               $Low
      setOption MaterialDetail        $Low
      setOption ObjectDetail          $Medium
      setOption ObjectHiding          $On
      setOption SubjectTracking       $Low
      setOption LotSkirtSettings      $Low

   endif

   setOption LightingOptimizations $High

   # adjust simulator based on cpu speed
   # adjust the sound quality based on cpu speed (this may be overridden below for low-end systems)
   # adjust animation sampling based on cpu speed
   if ($cpuSpeed >= $cpuLevelHigh and not $forceLowSettings)
      setOption SimulatorControls      $High
      setOption SoundQuality           $High
      setOption AnimationSamplingLevel $Medium
   elseif ($cpuSpeed >= $cpuLevelMedium and not $forceLowSettings)
      setOption SimulatorControls      $Medium
      setOption SoundQuality           $Medium
      setOption AnimationSamplingLevel $Medium
   else
      setOption SimulatorControls      $Low
      setOption SoundQuality           $Low
      setOption AnimationSamplingLevel $Low
   endif

   # turn off fullscreen fade
   setOption FullscreenFadeEffect    $Off
   if ($textureMemory >= 128 and not $isIntegratedChipset)
      setOption FullscreenFadeEffect $On
   endif

   # screen res defaults
   if (($maxVertexProgramVersionHWMajor >= 1) and ($textureMemory >= 128) and not $forceLowResolution)
      setOption ScreenModeResolution $High
   elseif ($textureMemory >= 64 and not $forceLowResolution)
      setOption ScreenModeResolution $Medium
   else
      setOption ScreenModeResolution $Low
   endif

   # special event cameras for cinematics
   if (($maxPixelProgramVersionMajor >= 1) and ($supportsSpecialEventCamera))
      setOption SpecialEventCamera $On
   else
      setOption SpecialEventCamera $Off
   endif

   # set dirty rect mode
   if ($supportsDirtyRect)
      setOption DirtyRect $Medium
   else
      setOption DirtyRect $High
   endif
   
   # set turbo mode
   if ($supportsTurboRect)
      setOption Turbo $Medium
   else
      setOption Turbo $Low
   endif
   
   if ($forceMediumMaterialDetail and ($memory >= $memoryLevelHigh) and ($cpuSpeed >= $cpuLevelHigh) and not $forceLowSettings)
      log $logGroup $logLevelWarning "Setting Material Detail"
      setOption MaterialDetail $Medium
   endif
   
   
endif


#############################################################################
#
# Software rendering
#

# set the options for the software rasterizer
if ($useSoftwareRasterizer)
   setOption LightingOptimizations $High

   setOption DirtyRect             $Medium
   setOption Turbo                 $Medium
   setOption OpaqueUI              $Off
   setOption LivePIP               $Off
   setOption SpecialEventCamera    $Off

   setOption Reflection            $Off
   setOption EffectsQuality        $Low
   setOption LightingQuality       $Low
   setOption Shadows               $Low
   setOption MaterialDetail        $Low
   setOption ObjectDetail          $Medium
   setOption ObjectHiding          $On

   # adjust simulator based on cpu speed
   if ($cpuSpeed >= $cpuLevelHigh)
      setOption SimulatorControls  $Medium # one lower than hw
   else
      setOption SimulatorControls  $Low
   endif

   setOption SoundQuality           $Low
   setOption FullscreenFadeEffect   $Off
   setOption AnimationSamplingLevel $Low
   setOption ScreenModeResolution   $Low
   setOption SubjectTracking        $Low
   setOption LotSkirtSettings       $Low

endif


#############################################################################
# save the selected configuration for this device.

boolProp activeDeviceUseSoftwareRasterizer $useSoftwareRasterizer

# Casie overrides all of the above settings
setOption MaterialDetail         $High
setOption ObjectDetail           $High
setOption ObjectHiding           $Off
setOption Shadows                $High
setOption OpaqueUI               $Off
setOption Reflection             $Off
setOption EffectsQuality         $Low
setOption LightingQuality        $Medium
setOption SoundQuality           $Medium
setOption DirtyRect              $High
setOption FullscreenFadeEffect   $Off
setOption Turbo                  $Low
setOption LightingOptimizations  $High
setOption AnimationSamplingLevel $Medium
setOption SpecialEventCamera     $Off


# Casie disables bumpmapping when accelerator doesn't have enough memory.
if ($textureMemory <= 32)
   setOption MaterialDetail     $Medium
endif
# When running Casie on Pixomatic, drop a mip level and disable bumps.
if ($useSoftwareRasterizer)
   setOption MaterialDetail     $Low
endif


#############################################################################
# tell the caller that we completely finished parsing the script
intProp configParserErrorCode 0

log $logGroup $logLevelInfo "Finished Config File"